HW INITIALIZING
| Cause: | Device Initialization in progress. |
| Action: | None. |
HW INITIALIZING INCOMPLETE
| Cause: | Device Initialization failure. |
| Action: | Contact your NEC service representative. |
ISL LOADING
| Cause: | Start of ISL Loading. |
| Action: | None. |
ISL LOAD FAILURE
| Cause: | ISL fails to load. |
| Action: | Contact your NEC service representative. |
CP BOOTING
| Cause: | Attempt was made to activate ISL. |
| Action: | None. |
CP BOOT FAILURE
| Cause: | ISL fails to activate. |
| Action: | Contact your NEC service representative. |
CP BOOT TIME OUT
| Cause: | Activating ISL fails. |
| Action: | Contact your NEC service representative. |
SYSTEM INITIALIZE COMPLETE
| Cause: | System initialization completed. |
| Action: | None. |
SYSTEM RESET COMPLETE
| Cause: | Resetting the system completed. |
| Action: | None. |
SYSTEM CLOSE COMPLETE
| Cause: | System successfully closed. |
| Action: | None. |
HW FAULT OCCURRED.LOGGING START(WAIT A FEW MINUTES)
| Cause: | A hardware error has activated system logging. |
| Action: | Contact your NEC service representative. |
SVR READ (Please wait max XX sec.)
| Cause: | The register information is being read. (Wait for XX seconds at maximum.) |
| Action: | None. |
SVR WRITE
| Cause: | The register information is being written. |
| Action: | None. |
SYSTEM CHECK END
| Cause: | System check processing is complete. |
| Action: | None. |
LOGGING END
| Cause: | Recording of hardware logs is complete. |
| Action: | None. |
SYSTEM STOP
| Cause: | The system stopped due to the hardware failure. |
| Action: | Contact your NEC service representative. |
RECOVERY INITIALIZE
| Cause: | Systems automatically recovering/restarting. |
| Action: | None. |
CPU ERROR
| Cause: | A hardware error occurred in CPU. |
| Action: | Contact your NEC service representative. |
MMU ERROR
| Cause: | A hardware error occurred in MMU. |
| Action: | Contact your NEC service representative. |
XCU ERROR
| Cause: | A hardware error occurred in XCU. |
| Action: | Contact your NEC service representative. |
IOP ERROR
| Cause: | A hardware error occurred in IOP(HIPPI). |
| Action: | Contact your NEC service representative. |
PCI ERROR
| Cause: | A hardware error occurred in PCI. |
| Action: | Contact your NEC service representative. |
CH ERROR
| Cause: | A hardware error occurred in the HIPPI channel. |
| Action: | Contact your NEC service representative. |
XMU ERROR
| Cause: | A hardware error occurred in XMU. |
| Action: | Contact your NEC service representative. |
DGPA ERROR
| Cause: | A hardware error occurred in DGPA. |
| Action: | Contact your NEC service representative. |
WDT RUN OUT
| Cause: | WDT time out occurred. |
| Action: | Contact your NEC service representative. |
DGP ACCESS ERROR xxxxxxxxxxxx
| Cause: | A failure occurred in the hardware control path. (xxxxxxxxx : Failure code) |
| Action: | Contact your NEC service representative. |
$PCCSL D05 DIS (SVP DOWN xx,xxxx,xxxxxxxxH,xxxxxxxx,xxxx)
| Cause: | SVP stopped; automatic restart successful. (xxxxxxxxxxxx : Failure code) |
| Action: | Contact your NEC service representative. |
$PCCSL D05 DIS (SVP DOWN xx,xxxx,xxxxxxxxH,xxxxxxxx,xxxx : yy~yy)
| Cause: | SVP stopped; automatic restart failed. (xxxxxxxxxxx : Failure code, yy~yy : Automatic restart failure code) |
| Action: | Contact your NEC service representative. |
0$SVP READY xxxxxx
| Cause: | SVP activated. (xxxxxx : SVP status code) |
| Action: | None. |
| Home |
|---|
| Contents | Previous Chapter | Next Chapter | Index |